|
Turbo Bell Extrusion System
A:Extruder Specifications
·
24 to 1 1.5 Inch Extruder.
·
Can be used In Line or Run at 90 degrees to accept a Crosshead Die.
·
Four Zone Heat/Cool, Barrel, Auto tune, Temperature Controllers.
·
Four Zone Heat/Only Die, Auto tune, Temperature Controllers.
·
Sensor less Vector 20 HP Inverter Motor Control.
·
20 HP Vector Rated Motor.
·
Digital Screw RPM Meter Red.
·
Digital Motor Amp Meter Red Lion.
·
Motor Ten Turn Potentiometer w/Start Stop Push Buttons.
·
Wesco 101 BI-Metallic Barrel.
·
Die Holder and Die Clamp Ring.
·
In-Line Die good for up to 1.25 Inch Extrusions.
·
Precision Air Regulator and Flow Meter Mounted at Die for easy Lumen Control.
·
Heavy Duty in Line Gearbox w/0-300 Screw RPM Standard (Different Speed Ranges Available).
·
9500PSI Rupture Disc.
·
Breaker Plate.
B:Vacuum Tank
·
7” X 7” X 6' Stainless Steel Tank QTY (1) 4’ Sections with QTY (1) 2’ Start up Section
·
Plexiglas for Tank with Gaskets
·
Heat Exchanger.
·
Drip Pans.
·
QTY (1) 3 HP Vacuum pump.
·
1 HP Recirculation pump.
·
Machine is 460/3/60 @ 20 Amps.
·
Water Manifold for cooling connections
·
Vacuum Manifold for Sizing Tooling Connections.
·
Casters and Jack Screws.
·
Holding Tank
·
Water Filter
C: Extrusion Water Bath
·
7 X 7 X 20 foot Stainless Steel Water Bath.
·
Closed Loop Receiving Tank w/In line Filter.
·
1 HP Water Pump.
·
Start/Stop Push Buttons Mounted in Central Control Console.
·
Copper and Brass Circulation Tubing and Valves.
·
6. Precision adjustments for moving tank, forward and backwards, side to side and up and down.
D: Extrusion Puller
·
30 inch x 4 inch Belt Puller.
·
2 HP AC Vector Motor.
·
AC Vector Motor Control.
·
Digital FPM Indicator.
·
Pneumatic open and close
E: AMS In-Line Extrusion Cutter
·
1” Thick Aluminum Top Plate Mounted on Parker Base
·
Digital Blade RPM Meter.
·
Digital Dual Preset Counter for Cut To Length Feature and Batch Counting
·
Quadrature Encoder 600PPR.
·
Encoder Mounting Bracket for Mounting on Puller.
·
Stainless Steel Guards
·
Capable of up to 2” Diameter Product.
·
Start Stop Push Buttons
·
Manual Cut Button
·
Safety Circuitry.
·
Machine Jack Screws For Height Adjustment.
·
Casters For easy Movement
·
All Electrical Components Housed In NEMA 12 Enclosure
·
Super Duty Wrap Spring Clutch Rated For Long Lasting Maintenance Free Service.
·
AC Vector Motor Control ·
AC Vector Duty Motor
F: Traversing Torque Winder
·
1/4 HP DC motor Control w/Torque Control (Tension).
·
1/4 HP DC Permanent Magnet Motor.
·
Traverse for Even Winding.
·
Shaft size 1 1/2" others available upon Request.
·
Start/Stop and Ten turn potentiometer mounted in main console.
Auxiliary equipment included:
§
5 Ton Chiller
§
20 CFM Compressor 5HP
All of the aboAll hardware is mounted on PARKER STRUCTURAL EXTRUDED ALUMINUM. All Guards are Stainless Steel. Add 1 airdrop, 1 water hook up and 230/3/60 at 60 AMPS and you’re making product!
This machine is designed to meet medical extrusion needs; custom electronics and diameter gauging interface is available.
Other Extruder Diameters and L/D available.
ailable.
System Turn Keyed for Three Product Sizes
Includes 3 days start up assistance by Rick Bell
Delivery: 12-16 weeks
AMS Co-Extruder
|
